Gewinde
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- https://drucktipps3d.de/gewinde-schrauben-muttern-selber-3d-drucken/
- http://www.emuge-franken-bg.com/attachments/article/97/15%20Gewindetabellen.pdf
- https://hackaday.io/page/5252-generating-nice-threads-in-openscad
- https://dkprojects.net/openscad-threads/
Examples
Using https://www.openscad.org/
Broomstick adapter
see https://www.thingiverse.com/thing:4758827
Broomstrick Thread for 3D Printer / STL
Printed Result
OpenScad Source Code
The sourcecode below is configurable. I have added some code to add an adapter tube to the thread.
/*
* ISO-standard metric threads, following this specification:
* http://en.wikipedia.org/wiki/ISO_metric_screw_thread
*
* Copyright 2020 Dan Kirshner - dan_kirshner@yahoo.com
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* See <http://www.gnu.org/licenses/>.
*
* Version 2.5. 2020-04-11 Leadin option works for internal threads.
* Version 2.4. 2019-07-14 Add test option - do not render threads.
* Version 2.3. 2017-08-31 Default for leadin: 0 (best for internal threads).
* Version 2.2. 2017-01-01 Correction for angle; leadfac option. (Thanks to
* Andrew Allen <a2intl@gmail.com>.)
* Version 2.1. 2016-12-04 Chamfer bottom end (low-z); leadin option.
* Version 2.0. 2016-11-05 Backwards compatibility (earlier OpenSCAD) fixes.
* Version 1.9. 2016-07-03 Option: tapered.
* Version 1.8. 2016-01-08 Option: (non-standard) angle.
* Version 1.7. 2015-11-28 Larger x-increment - for small-diameters.
* Version 1.6. 2015-09-01 Options: square threads, rectangular threads.
* Version 1.5. 2015-06-12 Options: thread_size, groove.
* Version 1.4. 2014-10-17 Use "faces" instead of "triangles" for polyhedron
* Version 1.3. 2013-12-01 Correct loop over turns -- don't have early cut-off
* Version 1.2. 2012-09-09 Use discrete polyhedra rather than linear_extrude ()
* Version 1.1. 2012-09-07 Corrected to right-hand threads!
*/
// Examples.
//
// Broom Stick
metric_thread (diameter=23.5, pitch=2.5, length=15,taper=0.2);
th=36;
tr=23.7/2;
tt=1.5;
translate([0,0,-th/2]) difference() {
cylinder(h=th,r=tr+tt,center=true);
translate([0,0,-tt]) cylinder(h=th-tt,r=tr,center=true);
}
// Standard M8 x 1.
// metric_thread (diameter=8, pitch=1, length=4);
// Square thread.
// metric_thread (diameter=8, pitch=1, length=4, square=true);
// Non-standard: long pitch, same thread size.
//metric_thread (diameter=8, pitch=4, length=4, thread_size=1, groove=true);
// Non-standard: 20 mm diameter, long pitch, square "trough" width 3 mm,
// depth 1 mm.
//metric_thread (diameter=20, pitch=8, length=16, square=true, thread_size=6,
// groove=true, rectangle=0.333);
// English: 1/4 x 20.
// english_thread (diameter=1/4, threads_per_inch=20, length=1);
// Tapered. Example -- pipe size 3/4" -- per:
// http://www.engineeringtoolbox.com/npt-national-pipe-taper-threads-d_750.html
// english_thread (diameter=1.05, threads_per_inch=14, length=3/4, taper=1/16);
// Thread for mounting on Rohloff hub.
//difference () {
// cylinder (r=20, h=10, $fn=100);
//
// metric_thread (diameter=34, pitch=1, length=10, internal=true, n_starts=6);
//}
// ----------------------------------------------------------------------------
function segments (diameter) = min (50, max (ceil (diameter*6), 25));
// ----------------------------------------------------------------------------
// diameter - outside diameter of threads in mm. Default: 8.
// pitch - thread axial "travel" per turn in mm. Default: 1.
// length - overall axial length of thread in mm. Default: 1.
// internal - true = clearances for internal thread (e.g., a nut).
// false = clearances for external thread (e.g., a bolt).
// (Internal threads should be "cut out" from a solid using
// difference ()). Default: false.
// n_starts - Number of thread starts (e.g., DNA, a "double helix," has
// n_starts=2). See wikipedia Screw_thread. Default: 1.
// thread_size - (non-standard) axial width of a single thread "V" - independent
// of pitch. Default: same as pitch.
// groove - (non-standard) true = subtract inverted "V" from cylinder
// (rather thanadd protruding "V" to cylinder). Default: false.
// square - true = square threads (per
// https://en.wikipedia.org/wiki/Square_thread_form). Default:
// false.
// rectangle - (non-standard) "Rectangular" thread - ratio depth/(axial) width
// Default: 0 (standard "v" thread).
// angle - (non-standard) angle (deg) of thread side from perpendicular to
// axis (default = standard = 30 degrees).
// taper - diameter change per length (National Pipe Thread/ANSI B1.20.1
// is 1" diameter per 16" length). Taper decreases from 'diameter'
// as z increases. Default: 0 (no taper).
// leadin - 0 (default): no chamfer; 1: chamfer (45 degree) at max-z end;
// 2: chamfer at both ends, 3: chamfer at z=0 end.
// leadfac - scale of leadin chamfer length (default: 1.0 = 1/2 thread).
// test - true = do not render threads (just draw "blank" cylinder).
// Default: false (draw threads).
module metric_thread (diameter=8, pitch=1, length=1, internal=false, n_starts=1,
thread_size=-1, groove=false, square=false, rectangle=0,
angle=30, taper=0, leadin=0, leadfac=1.0, test=false)
{
// thread_size: size of thread "V" different than travel per turn (pitch).
// Default: same as pitch.
local_thread_size = thread_size == -1 ? pitch : thread_size;
local_rectangle = rectangle ? rectangle : 1;
n_segments = segments (diameter);
h = (test && ! internal) ? 0 : (square || rectangle) ? local_thread_size*local_rectangle/2 : local_thread_size / (2 * tan(angle));
h_fac1 = (square || rectangle) ? 0.90 : 0.625;
// External thread includes additional relief.
h_fac2 = (square || rectangle) ? 0.95 : 5.3/8;
tapered_diameter = diameter - length*taper;
difference () {
union () {
if (! groove) {
if (! test) {
metric_thread_turns (diameter, pitch, length, internal, n_starts,
local_thread_size, groove, square, rectangle, angle,
taper);
}
}
difference () {
// Solid center, including Dmin truncation.
if (groove) {
cylinder (r1=diameter/2, r2=tapered_diameter/2,
h=length, $fn=n_segments);
} else if (internal) {
cylinder (r1=diameter/2 - h*h_fac1, r2=tapered_diameter/2 - h*h_fac1,
h=length, $fn=n_segments);
} else {
// External thread.
cylinder (r1=diameter/2 - h*h_fac2, r2=tapered_diameter/2 - h*h_fac2,
h=length, $fn=n_segments);
}
if (groove) {
if (! test) {
metric_thread_turns (diameter, pitch, length, internal, n_starts,
local_thread_size, groove, square, rectangle,
angle, taper);
}
}
}
// Internal thread lead-in: take away from external solid.
if (internal) {
// "Negative chamfer" z=0 end if leadin is 2 or 3.
if (leadin == 2 || leadin == 3) {
cylinder (r1=diameter/2, r2=diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
$fn=n_segments);
}
// "Negative chamfer" z-max end if leadin is 1 or 2.
if (leadin == 1 || leadin == 2) {
translate ([0, 0, length + 0.05 - h*h_fac1*leadfac]) {
cylinder (r1=tapered_diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
r2=tapered_diameter/2,
$fn=n_segments);
}
}
}
}
if (! internal) {
// Chamfer z=0 end if leadin is 2 or 3.
if (leadin == 2 || leadin == 3) {
difference () {
cylinder (r=diameter/2 + 1, h=h*h_fac1*leadfac, $fn=n_segments);
cylinder (r2=diameter/2, r1=diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
$fn=n_segments);
}
}
// Chamfer z-max end if leadin is 1 or 2.
if (leadin == 1 || leadin == 2) {
translate ([0, 0, length + 0.05 - h*h_fac1*leadfac]) {
difference () {
cylinder (r=diameter/2 + 1, h=h*h_fac1*leadfac, $fn=n_segments);
cylinder (r1=tapered_diameter/2, r2=tapered_diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
$fn=n_segments);
}
}
}
}
}
}
// ----------------------------------------------------------------------------
// Input units in inches.
// Note: units of measure in drawing are mm!
module english_thread (diameter=0.25, threads_per_inch=20, length=1,
internal=false, n_starts=1, thread_size=-1, groove=false,
square=false, rectangle=0, angle=30, taper=0, leadin=0,
leadfac=1.0, test=false)
{
// Convert to mm.
mm_diameter = diameter*25.4;
mm_pitch = (1.0/threads_per_inch)*25.4;
mm_length = length*25.4;
echo (str ("mm_diameter: ", mm_diameter));
echo (str ("mm_pitch: ", mm_pitch));
echo (str ("mm_length: ", mm_length));
metric_thread (mm_diameter, mm_pitch, mm_length, internal, n_starts,
thread_size, groove, square, rectangle, angle, taper, leadin,
leadfac, test);
}
// ----------------------------------------------------------------------------
module metric_thread_turns (diameter, pitch, length, internal, n_starts,
thread_size, groove, square, rectangle, angle,
taper)
{
// Number of turns needed.
n_turns = floor (length/pitch);
intersection () {
// Start one below z = 0. Gives an extra turn at each end.
for (i=[-1*n_starts : n_turns+1]) {
translate ([0, 0, i*pitch]) {
metric_thread_turn (diameter, pitch, internal, n_starts,
thread_size, groove, square, rectangle, angle,
taper, i*pitch);
}
}
// Cut to length.
translate ([0, 0, length/2]) {
cube ([diameter*3, diameter*3, length], center=true);
}
}
}
// ----------------------------------------------------------------------------
module metric_thread_turn (diameter, pitch, internal, n_starts, thread_size,
groove, square, rectangle, angle, taper, z)
{
n_segments = segments (diameter);
fraction_circle = 1.0/n_segments;
for (i=[0 : n_segments-1]) {
rotate ([0, 0, i*360*fraction_circle]) {
translate ([0, 0, i*n_starts*pitch*fraction_circle]) {
//current_diameter = diameter - taper*(z + i*n_starts*pitch*fraction_circle);
thread_polyhedron ((diameter - taper*(z + i*n_starts*pitch*fraction_circle))/2,
pitch, internal, n_starts, thread_size, groove,
square, rectangle, angle);
}
}
}
}
// ----------------------------------------------------------------------------
module thread_polyhedron (radius, pitch, internal, n_starts, thread_size,
groove, square, rectangle, angle)
{
n_segments = segments (radius*2);
fraction_circle = 1.0/n_segments;
local_rectangle = rectangle ? rectangle : 1;
h = (square || rectangle) ? thread_size*local_rectangle/2 : thread_size / (2 * tan(angle));
outer_r = radius + (internal ? h/20 : 0); // Adds internal relief.
//echo (str ("outer_r: ", outer_r));
// A little extra on square thread -- make sure overlaps cylinder.
h_fac1 = (square || rectangle) ? 1.1 : 0.875;
inner_r = radius - h*h_fac1; // Does NOT do Dmin_truncation - do later with
// cylinder.
translate_y = groove ? outer_r + inner_r : 0;
reflect_x = groove ? 1 : 0;
// Make these just slightly bigger (keep in proportion) so polyhedra will
// overlap.
x_incr_outer = (! groove ? outer_r : inner_r) * fraction_circle * 2 * PI * 1.02;
x_incr_inner = (! groove ? inner_r : outer_r) * fraction_circle * 2 * PI * 1.02;
z_incr = n_starts * pitch * fraction_circle * 1.005;
/*
(angles x0 and x3 inner are actually 60 deg)
/\ (x2_inner, z2_inner) [2]
/ \
(x3_inner, z3_inner) / \
[3] \ \
|\ \ (x2_outer, z2_outer) [6]
| \ /
| \ /|
z |[7]\/ / (x1_outer, z1_outer) [5]
| | | /
| x | |/
| / | / (x0_outer, z0_outer) [4]
| / | / (behind: (x1_inner, z1_inner) [1]
|/ | /
y________| |/
(r) / (x0_inner, z0_inner) [0]
*/
x1_outer = outer_r * fraction_circle * 2 * PI;
z0_outer = (outer_r - inner_r) * tan(angle);
//echo (str ("z0_outer: ", z0_outer));
//polygon ([[inner_r, 0], [outer_r, z0_outer],
// [outer_r, 0.5*pitch], [inner_r, 0.5*pitch]]);
z1_outer = z0_outer + z_incr;
// Give internal square threads some clearance in the z direction, too.
bottom = internal ? 0.235 : 0.25;
top = internal ? 0.765 : 0.75;
translate ([0, translate_y, 0]) {
mirror ([reflect_x, 0, 0]) {
if (square || rectangle) {
// Rule for face ordering: look at polyhedron from outside: points must
// be in clockwise order.
polyhedron (
points = [
[-x_incr_inner/2, -inner_r, bottom*thread_size], // [0]
[x_incr_inner/2, -inner_r, bottom*thread_size + z_incr], // [1]
[x_incr_inner/2, -inner_r, top*thread_size + z_incr], // [2]
[-x_incr_inner/2, -inner_r, top*thread_size], // [3]
[-x_incr_outer/2, -outer_r, bottom*thread_size], // [4]
[x_incr_outer/2, -outer_r, bottom*thread_size + z_incr], // [5]
[x_incr_outer/2, -outer_r, top*thread_size + z_incr], // [6]
[-x_incr_outer/2, -outer_r, top*thread_size] // [7]
],
faces = [
[0, 3, 7, 4], // This-side trapezoid
[1, 5, 6, 2], // Back-side trapezoid
[0, 1, 2, 3], // Inner rectangle
[4, 7, 6, 5], // Outer rectangle
// These are not planar, so do with separate triangles.
[7, 2, 6], // Upper rectangle, bottom
[7, 3, 2], // Upper rectangle, top
[0, 5, 1], // Lower rectangle, bottom
[0, 4, 5] // Lower rectangle, top
]
);
} else {
// Rule for face ordering: look at polyhedron from outside: points must
// be in clockwise order.
polyhedron (
points = [
[-x_incr_inner/2, -inner_r, 0], // [0]
[x_incr_inner/2, -inner_r, z_incr], // [1]
[x_incr_inner/2, -inner_r, thread_size + z_incr], // [2]
[-x_incr_inner/2, -inner_r, thread_size], // [3]
[-x_incr_outer/2, -outer_r, z0_outer], // [4]
[x_incr_outer/2, -outer_r, z0_outer + z_incr], // [5]
[x_incr_outer/2, -outer_r, thread_size - z0_outer + z_incr], // [6]
[-x_incr_outer/2, -outer_r, thread_size - z0_outer] // [7]
],
faces = [
[0, 3, 7, 4], // This-side trapezoid
[1, 5, 6, 2], // Back-side trapezoid
[0, 1, 2, 3], // Inner rectangle
[4, 7, 6, 5], // Outer rectangle
// These are not planar, so do with separate triangles.
[7, 2, 6], // Upper rectangle, bottom
[7, 3, 2], // Upper rectangle, top
[0, 5, 1], // Lower rectangle, bottom
[0, 4, 5] // Lower rectangle, top
]
);
}
}
}
}